Hydropower & River Projects
Budhil Hydroelectric Project, Chamba
A 70 MW station on a tributary of the Ravi
At a glance
- Location
- Budhil stream, Bharmour area, Chamba
- How to reach
- Via the Chamba–Bharmour road
- Walking difficulty
- Public approaches and designated viewpoints
Budhil is a two-unit generating station on the Budhil tributary. It uses a separate water route from the projects on the main Ravi.
🌄 Location and how to reach it
Use the Bharmour approach to place Budhil in the valley. The main road and the tributary’s upper catchment follow different lines. Confirm an accessible public stopping point on the relevant route.
Google Maps: Map the approach
- By road: Follow the Chamba–Bharmour road and check which public point is suitable for following the valley geography. Allow time for small roads and roadworks.
- By public transport: Use Chamba or Bharmour to confirm the available transport and arrange any last leg before leaving the main service.
- On foot: Walk in public areas of the settlements. Treat project roads, intakes and power-house compounds as operational facilities.
⚙️ Two 35 MW units
CEA’s Himachal profile lists Budhil as a 70 MW run-of-river scheme with pondage. The two 35 MW generating units went into service in 2012. Limited storage helps manage short variations in flow, while the tributary supplies the water on which generation depends.
🌊 Budhil and the Ravi
Budhil is a tributary scheme. Main-stem stations such as Kutehr and Chamera take water directly from the Ravi. Look for where the streams meet and how much higher the Budhil valley rises to see why a smaller river can support a generating station.
🧭 Reading the locations
The name of the stream, the power house and the operator’s local address serve different purposes. Use the operator’s directions only for an authorised visit. A public map stop near the road junction is a better starting point for reading the terrain.
Sources and Further Reading
Featured photo: Rupak Sarkar · Original photograph · CC BY-SA 4.0.