Skip to content
A Guide to Himachal

Hydropower & River Projects

Uhl Hydropower Cascade, Mandi

From the Barot intake and Shanan to Bassi and Uhl III

Reflections in the Uhl reservoir at Barot
The Uhl reservoir at Barot, at the upper end of the hydropower cascade.

At a glance

Location
Barot, Joginder Nagar and the Uhl valley, Mandi
How to reach
Separate routes for Joginder Nagar, Barot and the lower works
Walking difficulty
Public approaches and designated viewpoints

The Uhl system connects an early hydroelectric station at Shanan with downstream generation at Bassi and Uhl III. Its works span more than one valley road.

🌄 Location and how to reach it

Start in Joginder Nagar to understand the Shanan side of the scheme. Barot is the separate intake area on the Uhl. For Bassi and Uhl III, check access and road directions separately rather than expecting a drive along the water conveyance route.

Google Maps: Map the approach

  • By road: Use the Mandi–Palampur corridor for Joginder Nagar. Confirm the turn towards Barot and allow time for the drive on both legs.
  • By public transport: Travel to Joginder Nagar by bus and confirm a separate ride and return from Barot if visiting both sites.
  • On foot: See public settlement and reservoir areas only where signed. Stay clear of old haulage lines, active waterworks and substations.

⚙️ Barot and the Shanan station

Water held at Barot is routed across the ridge towards Shanan at Joginder Nagar. The steep fall on that side supplies head. The old alignment for moving construction material is part of the project’s history and is separate from the enclosed water route. The CEA lists Shanan at 110 MW, with four 15 MW units and a later 50 MW unit.

🌊 Bassi and the lower stage

Bassi uses water discharged from Shanan. The CEA inventory gives Bassi 66 MW. Uhl Stage III adds a separate 100 MW station farther downstream, listed by CEA as commissioned in 2025. Together the sites show how a scheme can use a series of falls and extend over decades.

📜 Reading the history of the system

Published accounts may focus on the original Shanan equipment or on its later configuration. The CEA unit registry gives the individual machine ratings. Keep old project dates separate from Uhl III commissioning and check official notices for current access arrangements.

Joginder Nagar’s railway and Shanan heritage

Sources and Further Reading